Then make sure that communication isn’t being blocked by a firewall (the AVG firewall, for example, is very strict). Problem solvingįirst make sure that you have downloaded the correct drivers and that you have properly following instructions and not made a mistake somewhere. If you don’t have one, contact the administrator to set one up.

To use the system you need to have a four-digit code. You can monitor printers from the department at the IP addresses: and. Don’t forget to enter your user code in the statistics card and then click on “Run from Scanner”. They can be used for scanning in any graphic program ( GIMP etc.). Then proceed according to the screenshots below (the exact steps may vary depending on the Windows version):įrom the aforementioned website you can download and unzip the drivers. When you want to print, don’t forget to go to printer properties (preferences) and under the statistics tab enter your number. For the Ricoh Aficio MP 171 select port 10.2.1.107 and port name IP_10.2.1.107.For the Ricoh Aficio 2018D select port 10.2.2.47 and port name IP_10.2.2.47.In the Select printer port dialogue box, select Create a new port and from the scroll down menu select Standard TCP/IP Port.įor each printer enter (create) a different port (each printer is on a different IP address):

Go to the Control Panel and then to Printers and Faxes. Download the current driver for your system and extract it to any folder in your computer. In the product category select multi-functional device and from the scroll down menu select the particular model (Aficio 2018D or Aficio MP 171). Go to and download and install the driver for the Ricoh Aficio 2018D and Ricoh Aficio MP 171 printers.

Ricoh mp 171 scanner software